Skip to content
Nordbatt 2019
  • The conference
    • Apply for student travel grant
    • Full program
    • Program at a glance
    • Posters
      • Overview
      • All poster abstracts
      • Info to poster presenters
    • Battery tutorial Day1 8am
    • Breakout sessions Day2 11am
      • 1. Battery powered ferry trip
      • 2. Disassemble cells – practical session
      • 3. Multiphysics simulations of batteries in Comsol
      • 4. EV-battery applications via DC-charge port
      • 5. Launch event of Battery Quests
      • 6. Operando and in situ characterization of battery materials
      • 7. Introduction to battery management technology
      • 8. Battery recycling
  • Sponsor/exhibit
    • Sponsors and supporters
    • Sponsorship opportunities
    • FAQ – sponsor and exhibitor
  • Venue
    • The conference hall
    • Getting there
    • Restaurant Klub
    • Accommodation
    • DTU Energy web
    • VisitCopenhagen web
  • Past events
    • Nordbatt2013
    • Nordbatt2015
    • Nordbatt2017
    • Nordbatt2019
  • Contact
    • Committee
  • // Upcoming conference

Poster: Effect of carbon coating on the electrochemical performance of SiO2/C Anodes for Li-Ion Batteries

Poster: Effect of carbon coating on the electrochemical performance of SiO2/C Anodes for Li-Ion Batteries

Author: Maria Valeria Blanco
Title: Effect of carbon coating on the electrochemical performance of SiO2/C Anodes for Li-Ion Batteries
Affiliation: Norwegian University of Science and Technology

Abstract

We analyzed the effect of carbon coating on the electrochemical performance of SiO2/C composites to be used as anode materials of Li-ion batteries. Composites were prepared by mixing silica nanoparticles with different amounts of glucose, sucrose and cornstarch and subjecting the resulting powders to high temperature annealing treatments at 850 °C, 1050 °C and 1200 °C. Structural, microstructural and textural differences on the composites were related to differences on the electrochemical performance of the electredes. A systematic effect of the different carbon precursors and heat treatments on the specific capacity displayed by the electrodes was observed and it allowed to identify the most suitable carbon precursor and its percentage on the composite to achieve the best electrochemical performance.

Full list of posters


Poster: Creating Automotive Renewal Project
Poster: Comparison of single crystal and polycrystalline lithiation for NCM622 cathode materials
Phone: +45 2275 4487
Email: contact@nordbatt.org

Danish Battery Society
Haldor Topsoes Alle 1
2800 Kgs. Lyngby
Denmark
Theme by Colorlib Powered by WordPress